One of the most ignored parts of your car repairing tool is a line flaring tool. The fact that you might always ignore that a professional mechanic might have one of those tools in their warehouse.
If you are in a position that you don’t have access to your closest automobile service center to fix your braking system, you might need one of those best brake line flaring tool options.
The hardest and precise step of servicing a break is line flaring. Break lines are delicate, and the line joining has to be done precisely. We have recommended several bests in the market that values best for the money you will be spending.
Reviews of Best Brake Line Flaring Tool in 2020
We have checked and tested 21 different line flaring tools to make this review and we have come up with the top 11 items. Check out the reviews and advantages with some down backs of the tools to check what is the perfect one for your break line repair job.
1. Titan 51535 3/16-Inch- Best Double Flaring Tool
Overall Best Flaring Tool of 2020
Break line flare tool has never been this compact and yet powerful as the Titan 51535 3/16. At a minimal and handy size, it gives the performance that values more than what you are getting. You can keep it inside your back trunk, and you can use this kit on the go if you need so.
It has a removable handle that you have to use to control the repair unit. The flaring unit becomes an independent part that you can set on the working benches to work on different positions and manners. The double flare looks super natural and well-rounded off.
It does not show up with issues like leakage or deforming after installation. It perfectly shapes off 3/16 SAE that will not sleep off or move at all. This 3/16 inch double flaring tool easy to operate. You don’t even have to look while you are doing this.
I have used it after making the fill with deburring the I.D. And the finished result was astonishing. After using the deburring tools this brake flare works excellent.
It comes with a positioning bolt that gets your measurements just right. You get to make two kinds of flare because of the reversible OP1 and OP2 punch screw.
- A very compact item for carrying anywhere
- Works well with deburring tools
- These brake line flaring tools can be used in small places.
- Quick fixing under the car is possible with this.
- Comes with easy to use guide
- Does not have the diversity
2. Eastwood Professional Brake Line Tubing Flaring Tool
Best Eastwood Flaring Tool
While making the “brake line flaring tool reviews”, we came across a lot of positive reviews on different eCommerce sites about this item. Being a bit pricey its perfect thing to be as renowned as the Eastwood Flaring Tool. And we have tested this item to know why.
And our result was pretty impressive. Sometimes, compatibility can be an issue working with automotive repairing. But not with this one, you can use it for different vehicles and items. It comes with perfect versatility you will need to apply for different cars. Also, using this one for the car, jeep or cars is pretty simple and too comfortable if you are doing it for a long time.
Also, why these brake line flaring tools are one of the best choices for professional uses is its speed. Making a flare will not take more than a minute, making it one of the quickest line flaring options in the market. To make it comfortable in robust car operations, the t-handle works securely.
The quality materials and design ensure you can use this best double flare tool with durable materials like stainless steel to softer metals without any sorts of trouble
- Made with high-quality materials to handle heavy-duty jobs
- The design is made in a way that offers maximum versatility
- This soft steel brake works like a charm
- Comes with a t-handle feature for safe and comfortable operations
- You can flare the brake line in a fast and effective way
- Easier to use for professional line flaring
- The cost is on the higher side
3. TGR Professional Brake Line Flaring Tool- 45 Degree Set
Best Professional Flaring Tools
This is a box of machines that can stay in your car and it is considered as the best flaring tool kit among the professional ones. It has the diversity to use on any kind of pipes. If we look at the mechanisms of this flaring tool, it can be said that this is a bench system in a compact portable design.
You will get four dies. These are enough for working on any kind of car or even big machines like tractor or power tillers. There are two leavers in this device, one to hold the block in place and another to make the flare.
You will get eight types of flares. This is an absolute deal of a set. Pressing on the handles to make the flare is comparatively easy because of prominent leavers and reliable construction. The 45-degree flaring option is another reason to choose this item.
As it has the diversity of working on any kind of vehicle, it has been recommended by most of the professional automobile mechanics.
- An efficient leaver mechanism keeps it comfortable to operate
- A variety of types of molds are included in a package
- Portable flaring tool for brake lines to take anywhere
- Perfect iso bubble flare makes using it more reasonable
- Solid and rugged design
- You will need a bench to set this up and operate
4. ARES 18019 – Double Flaring Tool Set with Extra Adapters
Top Hydraulic Brake Line Double Flaring Tool
The all in one and a full package should always be like the ARES 18019. This is by far the hydraulic brake line flaring tool that has all the accessories that you might need in a workshop. This is also known to professionals as an acknowledged solution in a garage.
The has been designed to accept all types of lines. The central part of this machine is the two jaws. Two separate screws secure them together. They are easy to turn and tune.
Tightening the two jaws using hand pressure will be enough, but if you need, you can use a solid metal piece to tighten it up manually.
The job of nailing the flare is by using different adapters. There are in total of 7 adapters to make sure that you can go versatile with this instrument. After making the first bend, use the pinpoint to round it up.
Along with all the adapters and accessories, you will also get a line cutter with this brake line 3/16-inch, 1/4-inch, 5/16-inch, 3/8 inch double flaring tool. It is a very compact cutter that you can work in small places.
- All high-quality parts have been used to make it hard and tough
- Ha a superior versatility
- Comes with soft steel brake line tubing options
- Top-quality hydraulic brake line repair tool
- Comes with an additional line cutter
- You have to be a professional to fully utilize the set
5. OTC 4503 Stinger Double Flaring Tool Kit
Best Brake Line Tool in Compact Size
OTC 4503 is a line flare tool that you can easily carry in your pocket to save at the crucial time. This falls in the category of hydraulic brake line flaring tool that has been made for all kinds of metal pipes. The main attractive feature of this small tool is being made of heat-treated steel and modest in design.
Why it is the perfect pocket size brake line tool?
There are many reasons why we have picked this item. First, to adjust the tightness of the screws and locks, you will get a metal bar. This becomes helpful when placing and securing the line on the block. The clamps also accept the T-handle, which you can use to maximize accuracy.
The yoke cone is super smooth and accurate. Using it effectively is easier if you can use a good bench vise while working. It can create the perfect flares possible. Coordinating your adopters and the flaring ends, you can easily create a single, bubble, or double flare.
The unit comes with a nice storage case that is made of molded plastic. This can be the tool that you can use for your team or on your versatile daily rig.
- A very small and a compact unit that comes with everything
- A nice carrying box has been provided
- A very good the choice for the beginners
- Does not have a durability that might last for a very long time
6. Neiko 20656A Auto Double Flaring Copper Brass Tubing
Best for Brake Line Tubing
Neiko 20656A is known as the best brake line double flaring tool only because the manufacturers provide a beautiful carrying box. This can be a versatile tool for different types of flares. The most exciting part is that they can make single flares too, which is rare these days.
In the construction of this line tool, the Manufacturers have used heat-treated steel that makes it rough and tough. Heat-treated steel makes it a more robust and reliable unit to break or bend through this process.
All the materials on this line flare tool have an aluminum finish that keeps it corrosion-free forever. The included box keeps it real snug and all together. It becomes easy to store and carry in the back trunk.
Using it for brake line tubing is easier if you use proper automotive tools and bench vise. You can get better use of some informative videos of this website to work correctly.
The biggest drawback of this unit is that these cannot be used without any working bench. The handles are well made and rounded off. They don’t poke or pressure your finger when pushed hard.
- Made of heat-treated aluminum
- Well rounded off edges make it safe for your skin
- reduces friction in between the lines
- Has a variety of adapters for different types of flares
- Provides a beautiful carrying bag
- Have to use on a bench
7. MASTERCOOL 72475-PRC Universal Hydraulic Set
Best Flaring Tool for Stainless Steel Brake Lines
If you want to own the suitable flaring tool for steel brake lines that every professional owns, you should check this out. This Mastercool flaring tool is all in one set that can replace all the attachments and accessories.
The main part of this kit is the case. It is a simple and straightforward case. Every corner of the evidence comes filled with adapters. The dies are so diversified that it will be able to support push connections on various types of lines.
Operating this tool is super easy for all the beginners. The unit looks like a hammer. The top part has jaws that hold the die to the machine. There is a palm leaver that pushes the adapter on the lines. The adapter receiver has a magnetic clip. This ensures that the adapter is not falling off, and yet it remains accurately on the receiver.
The leaver is pressed using a hydraulic system. This creates a lot of pressure with a short displacement. You can also regulate how you want your handles to be.
- It has a lot of attachments for different types of brake lines
- Magnetic adapter the receiver keeps it stable and placed correctly
- Can be operated in a shallow area
- The whole package is hefty to keep in your car’s back trunk
8. Shankly Flaring Tool Set (10 Piece )
Perfect Flaring Tool for Brake Lines with Adapters
Shanky is the mother of single flaring tools in the market. It only can make single flares who want to go old school and yet want the best and secure connection in the brake lines. This is by far the professional brake line flaring tool that serves the quality that you will ever need.
In the box, you will find two separate dies for varieties types of brake lines. There are nine sizes of expansions. Each of them is well-made using some of the best steels manufactured.
You will barely see any flexes with the flaring cones and the swivel-type adapters. It is super easy to operate this machine while you are on the go.
In the package, you will also get a tube and pipe cutter, which will be a beneficial tool for the beginners. This tool also has the same high quality as the flaring tool.
- Does have a lot of adapters for various brake lines
- You will not need a bench to operate this device
- Comes with a compact tube cutting device
- Comes in a decent design as flaring tool for brake lines
- You will not get an adapter or attachment for double flares
9. RIDGID 83037 Model 458R Ratcheting Flaring Tool
Steel Brake Line Flaring Tool in Budget
RIDGID is a tiny and compact pocket compatible device that can always be a part of your backpack or toolbox. Though the size is small and can be assumed that it does not have enough for metals, it can be considered as the perfect flaring tool for stainless steel brake lines at the budget range.
The device consists of a hard and tough metal block that has the ability to take flares up to 3/4 of the size. The press is another part of the process which has a ratchet screw. You have to turn it tight to bend the pipes to make the flare.
The ratchet system on the screw does make it easy to operate and fast for the beginners. The ratio of the screw is also super convenient for creating enough pressure.
The company also gives a lifetime warranty which makes it a perfect tool for long term usage.
- A very small and lightweight device to carry around
- Easy to use operations
- This has been made precise and finished well
- Can be used on various types of brake lines
- Small handle and leavers cannot push enough for thick lines
10. OTC 6502 Master Brake Flaring Tool Kit
Best Bubble Flare Tool for Professional Use
At a very affordable price range, 6502 Master is the professional brake line flaring tool that serves all a professional service center will ever need it.
It allows you to press three types of flares, including double and bubble. They are super convenient and makes the seal that makes it safer and more durable to the heavy users. There are four adapters included to line it up accurately.
Ten types of line flaring adapters are given in the box which provides confidence on the road. The flaring bar that is provided is made of heat-treated steel to handle the stress of any level.
The convenience and the other bubble flares feature make it the best bubble flare tool of 2020. The holes line up nicely and the arbor press gets into the cavity without any hassle.
Inside the box, you will find a locking screwdriver and a brake line cutter. It will expand your possibilities of getting more done with a single toolbox. This is a product from a very well-known company who has a reputation of almost a hundred years for making the top of the line products.
- An excellent item for mechanics for the money
- The design ensures maximum supports in automotive uses
- Top-notch finished flaring bar and arbor press
- Comes with line cutter and a screwdriver
- The clamps are too small to set on a bench with secured lock
11. Wostore Double Flaring Tool Kit Copper Line
Best Double Flare Tool for Copper
In a tiny and compact form factor, you won’t get a better alternative than Wostore Auto Double Flaring Tool which is the best flaring tool for stainless steel brake lines. It is because of the built quality and materials are stiff and sturdy enough for carrying out the job that is thrown at it.
This item has the power to pierce through steel, copper, or brass tubes easily, and the flares that it makes are high quality. The precision you will get from this small device is comparatively outstanding.
On the whole construction of solid blocks, it has a coating of chrome, which makes it smooth and seamless while making flares. Heat-treated metal has been used to make it heavy duty and durable to apply for an extended amount of time.
You can use these on the rainy season and yet forget about getting corrosion or rust. This best brake flaring kit has enough protective property against humidity.
- Comes with a well-organized carrying box
- Perfect line flaring kit for copper and aluminum
- A small amount of equipment is enough for professional jobs
- Available for heavy-duty and long-term use
- Precise measurement and smooth finishing
- The tightening bolts are not super-snug
How to Choose the Best Brake Line Flaring Tool: Buying Guide
Break hydraulics are the essential parts of your car, and if the safety is not maintained well, this might cause your life. If you are working on your vehicle and you are thinking about getting the best service on your brake lines.
You should find out what will be the easiest to operate. We will be keeping our suspicious eyes on the following matters.
Why do you want to buy this tool?
The main reason would be to save time and also save a lot of money that you might have to pay for the service. While you are buying a personal flare tool, you have to be sure how much money you are spending on it.
If you are spending way too much money on the tool, it better not worth the money. You also have to be nitpicky about the operations on the kit. If it is dangerous or takes too much time, you better make it to an automobile mechanic near you.
How much does the tool weight?
This question arrives when it is about carrying your brake line flaring tool in your car. There are flaring tools with different kinds of operations, and due to the designs, the weight and heft of the device changes. The bigger and the heftier devices are easy to carry around and use too.
It will be a wise decision to keep your flaring repair kit in your rear trunk of your vehicle. A lightweight device will do very well in this situation. They will be easy to carry, on hand operation will be easy and straightforward.
There are three types of line flares that most of the professionals can make on the brak lines. They are different in shape and size. They are not the same in shape on the flare, and the safeties on them are different from each other.
Every tool you are going to come with some kinds of adapters. They are responsible for making different types of flares on the brake lines.
Back in the days, there were not that many flaring items in the market. The most common type of flare was the single flares. They are comfortable and straightforward to make.
But they are not as very secure and safe for long term performance. Double flares and double flares are the most secured flare types. They have advanced design and does not have the possibility of leaking brake fluids over a short time.
They are not easy, but with practice, anyone can compose double and bubble flares
The versatility of the flaring tool
The versatility of the flare tool you are going to purchase is going to depend on how many sizes of brake lines this can accept. The central unit that holds the line on a place is the die or the grip. There will be holes for grabbing the brake line.
The more number and sizes of holes are there, the more versatile they are. A handy set of the flaring tool will be an excellent choice if you want it for your friends and buddies.
How to use the device?
As a beginner or as a new explore, you must develop the strategy and way of making flares. The smoother the processes will be, the more you will be able to be perfect at your job.
Is it precise?
Cone on a line repair tool presses well against the die to make clean flares. An unfinished or defected flare can be dangerous on the road. You must look forward to the reviews, which will give you the idea of which one has the quality and the precision.
Is it durable enough?
Line flaring needs a considerable amount of pressure. You must put that much pressure or stress on the parts of the line flaring kits. They have leavers and hydraulics.
If there are any mechanical advantages related in between, the handles and leavers will be on stress for sure. Make sure that they are well made better metal elements that have been used when producing.
Frequently Asked Questions on Line Flaring Tools
Some of the questions often users ask before using the brake tools are often neglected. But we found them essential to know before anything else. Here we have collected some of the critical questions and provided our thoughtful answer.
Why should we have to be conscious about the perfect flare?
Break line is the way the hydraulic brake fluid runs through. In between the connections of the brake line, some joints have to be made.
The brake lines are made of metal, and to connect them one with another, some leakage might occur if it has not been made fluid-tight.
To avoid these kinds of conditions, the line tips are bent in a way so that that there are tight and leak-free. This is the reason every professional automobile worker cares for the perfect line flare.
What type of flare is the safest?
The old school way of single flare has become unnecessary and less secure for the recent time. People are getting more interested in double flares.
Double flares are more secured than the single ones. They fit tight and snug around the pipe joints.
Bubble flares are also safe. They are a bit thicker than double flare. They have the evenest surface on the flare compared to the others.
It is recommended that you try all of those and you will find what might be the most secure in your driving conditions.
Is copper any good for using as brake lines?
Among all the popular fluid pipe material, copper is one of the bests. They are good heat conductive, but using them on brakes might not be a good idea.
Brake liquids have to deal with high pressures, and in that pressure, copper pipes are most likely to be exploded.
Does the flaring tool make a difference?
To ensure security and safety, you have to use a flaring tool. This is a permanent solution to keep it leak-free.
Things to Do Before the Flaring Process
Taking care of your car and inspecting it for repair issues will always need efforts and enough arrangements that will make your work easy and straightforward. There are some does and don’ts of flaring your brake line.
Make sure that the tube is ready.
While connecting your brake line with a flare union, you must make sure that the line is ready to be flared. The line is clean, and it does not have any gunk inside that might give you hassles after the break has been fitted.
Before you insert the brake line into the tool, you have to check and recheck that the parts of the flare fitting are added through the brake lines. There won’t be a chance to regret this step.
Use the right adapter
A line flaring tool comes with several types and sizes of line flaring adapters. Every brake lines have their measurements and capacities printed on the lines. When attaching to the die, make sure that you are setting it up on the right inscription.
When you are setting up the adapter on the press, check if it matches the line size and the flare union. According to the flaring tool you have, you have to order the flare union.
Secure the dye at a very stable position
To get the best and more relaxed output, you have to use a bench where you can secure the die and use both of the hands to press on the livers or the screws.
The metric brake line repair item comes with a separate unit of the die. These are more usable on the benches.
There are flaring tools that have extra handles to use without benches. They are suitable for fast workflow, but you have to use much force and then to use mechanical efficiency.
Do not push too hard
After you have made the flare of the right size and the proper shape, you much not go further than needed. When the screw stops with regular force, consider the it is done here. Further pushes might DE shape the flare that is necessary for that situation.
Try not to make a single flare.
Single flares were cool back in the days, but they have proven not to be very secured. If you don’t already own a flare union, you better get a bubble or double flare joint. This will help you get a better and secured brake fluid joint.
Last Few Words
It is a regular process that you have to refuel your brake oils. Occasional servicing on the brake and clutch line is a very common service that every car owner should go through. A well-made brake line flare tool should be a necessary option if you want to have a DIY solution.
Get a long checklist of your priorities, and checking them, you will be able to find out what will be the best choice for you. Make sure it is robust and reliable.